Selvom emballagen får et par på kassen, så er dit produkt altid godt beskyttet med vores kvalitets skumindlæg og pakkefyld.

Farusa har et stort udvalg af støddæmpende indlæg, der kan indrettes eller produceres præcis efter dit produkt. Nedenfor kan du læse om, hvilke muligheder du har for at beskytte dit produkt under transporten.

PACKAZOTE

Ønsker du et særdeles effektivt og fleksibelt støddæmpende indlæg, kan vi tilbyde PackaZote – et sort PE (polyethylen)-skum, der benyttes til indretninger af emballager. Vi står selv for produktionen og kan derfor tilskære og tilrette indlægget i alle tænkelige mål, størrelser og antal – præcis efter dine behov.

 

LÆS MERE OM ALLE VORES INNOVATIVE EMBALLAGELØSNINGER NEDENFOR.

 

EPS packaging chips

Used as a cheap packaging material for all kinds of products. EPS is also available as plates, blocks or molded inserts.

Polyether, polyester and PE-skum (Packazote)

If you need precise cuts then these qualities are very useful. They are available in different hardness and often give the product and the shipment a more exclusive look than with Bonded Foam.

Bonded foam

Bonded foam is a great foam granulation available in hardness from 100 kg/m3 to 220 kg/m3. We shape the foam exactly to your needs and adjust the hardness to the weight of your product.

The advantage with Bonded Foam is its ability to resist a lot of shocks without losing its shock absorbing ability.

Bonded foam is the best sustainable foam solution, because it is produced by production leftovers and scrap.

Profile foam

Profile foam is often used for circuit boards, components and other fragile products. It is produced of polyether and polyester and the wave heights are adjusted to the product.

Profile foam works very well for products that are not too heavy and need to be held in place.

farusa-emballage-exportemballage

Foam is the icing on the cake

A very strong outer packaging is not always enough to protect a product fully against vibrations or shocks. We have many types of foam – for instance with fire inhibiting properties or antistatic agents – and you can choose an insert that matches your product.

Machine cut, pin cutting or water cutting – and maybe gluing – is used in the production process.